Tuning Ford Sierra – a complete update of a car in three steps
Perform tuning Ford Sierra, of course, you need. Moreover, as practice shows, the sooner the better. Such a rush is associated with the presence of low-quality factory parts that require replacement in the first place. So we will not only stabilize the operation of the car, but also make the car much more modern.
1 Sierra sedan engine tuning
The first thing that comes to mind when we hear about tuning old American cars is the improvement of the powertrain. This pattern has its reasons – every owner of a Ford car sooner or later was forced to change, if not the entire engine, then most of it for sure. The Sierra model was no exception. The first such car left the assembly line of the Ford plant back in 1982, and if at that time its spare parts were considered of high quality, then after a few years they had to be changed.
And what can we say about the present. Well, since the main part of the Sierra is its engine, then it is necessary to start tuning from it. For the sporty version of the Ford Sierra, the cylinder heads need to be modified. The regular carburetor will not be able to pull the full power of the tuned car, so it will need to be replaced. In addition, it is necessary to work on the intake and exhaust valves, expand them for the free passage of the fuel mass. Along with tuning the engine of a sedan, it is worth taking care of the braking system of the car.
Finalization of cylinder heads
As standard, only the front wheels are equipped with disc brakes. To improve the system, you need to install the rear discs and make them independent of the front axle.
If the driver does not require special speed characteristics from his Ford Sierra, the car's engine can be changed in other ways. The most expensive and effective option is to completely replace the engine with a unit from a Ford Granada or Scorpio. These models cannot be called much more powerful than Sierra, however, with proper chip tuning after replacing the motor, an increase in horsepower by 25% is provided to the latter.
Power unit from Ford Granada
Summing up, we can say with confidence that tuning the engine and other elements of the Ford Sierra with your own hands is a useful and exciting business. There really is something to accelerate, you can give freedom to your imagination.
2 Improvement of the station wagon body – new headlights
Modernization of the appearance of the Ford Sierra station wagon suggests itself. What are the headlights of an American car worth… The manufacturer was one of the first to venture to install optics of this type. Customer experiences were varied. Some argued that it couldn't get any worse, others liked this novelty. Be that as it may, today such headlights will no longer “work”, so they should be changed in the first place.
Modernization of the appearance of the Ford Sierra station wagon
Before installing new optics on the Sierra station wagon, you need to find the right parts. Headlights from the Audi A3 and A4 are perfect for this. Such optics perfectly illuminates the road, it is quite high quality and durable. In addition, it has the same wiring as the Ford Sierra. In addition to headlights, we need:
- glue;
- double sided tape;
- insulating tape;
- flat screwdriver;
- neon lamps.
First, we dismantle the old station wagon headlights. To do this, using a flat screwdriver, lift the latches of the lining and pull out first its lower part, and then everything else. Next, carefully dismantle the Ford headlights themselves. If necessary, we cut off the wiring of standard optics. After that, carefully clean the space behind the headlights and apply a small amount of glue. Until it dries up, we take new headlights, stretch their wires parallel to the standard wiring and fasten the headlights over the glue.
Mounting new headlights on the Ford Sierra
Of course, the glue will not be able to completely fix the optics, so we take double-sided tape and glue it in places where the new headlights have not yet been fixed. Once the new parts are fixed, you can proceed with the installation of neon lamps. To do this, they are simply glued with double-sided tape in any position you like. At the end of the tuning, we connect the wires we stretched earlier. We check the operation of the new headlights and, if everything is in order, we mount the protective cover.
3 Interior upgrade Sierra hatchback
After we have done a titanic work to improve the details and body of the Ford Sierra, it is worth thinking about increasing the comfort during operation. To do this, we will make some changes in the cabin using the Sierra hatchback as an example. To do this, you do not need to drive the car to the service station. All work can be done by hand.
Changes in the interior of the car Sierra hatchback
So, the Sierra hatchback has a very simple interior without any “bells and whistles”. Its first drawback is poor-quality fabric on the seats. It should be replaced, and for the upholstery of the interior it is best to purchase genuine leather or leatherette. These materials will bring shine to the car, but they also cost accordingly. Another disadvantage of the Ford Sierra interior is the presence of third-party noise. By installing felt soundproofing with our own hands, we can achieve the optimal sound of music in the hatchback cabin and eliminate third-party sounds from the street.
Interior upholstery with genuine leather
Another detail that needs to be changed is the stock Ford steering wheel. There are two ways to replace it. The first is the purchase and installation of a universal lining. The second method is the installation of a new modern steering wheel with various backlights and controls.
