Replacing low beam lamps in the Renault Duster. What are the influences of burnt elements, how to choose the right lamp, which manufacturers should be trusted
In the main optics of most Renault cars, low-quality incandescent lamps are installed at the factory. Parts work for about a year and then burn out. Self-replacement of dipped beam headlights on a Renault Duster does not take much time. It is important to choose the right cartridge and follow the instructions during operation.
Description of optics
The lighthouse is divided into several independent blocks, each of which is responsible for a specific function. Separately, there is a section with side and running lights, which is located at the top of the headlight, in the area closest to the fenders. Under the common block is a large dipped beam reflector. The rest of the space is occupied by a compartment for high beam and direction indicator.
The headlights of the Duster are not distinguished by their elegant shape or the presence of LEDs, but they perform their functions perfectly. In heavy rain or washing with a gun, the headlights do not leak or fog up, which indicates good build quality and high-quality ventilation valves.
What do the lamps do?
Every lamp in a car has a huge impact on the safety of the driver and the vehicles around him. A burned out coil in a brake light or turn signal can cause an accident in city traffic. Lack of good lighting on the runway at night can lead to a serious accident.
The low beam headlights are designed in such a way that, when paired, they provide the greatest coverage of the road for illumination. When the lamp burns out, the light beam becomes weak and cannot simultaneously illuminate the sidewalk area and the edge of the oncoming lane. Therefore, when driving at night, you may not notice a cart left on the side of the road, an animal crossing the road, or spread out boards.
That is why it is necessary to pay attention to the condition of the lamps and check their performance before each trip. Replacing a headlight bulb on a Renault Duster takes no more than 30 minutes, so a trip to a service center is not required.
How to buy the right lamp
Renault Duster uses lamps that are widely available on the market, so there will be no problems with the purchase. The following types of elements are installed in the optics:
- PY21W is installed in the block of direction indicators. The flask is orange.
- H1 is responsible for the high beam sector.
- H7 works like low beam.
- W5W is installed in the upper block and is responsible for the side and running lights.
In order to purchase a suitable part, you must tell the seller the designation of the lamp or the car body number. By the body number, you can determine the exact model of the lamp and its power. Renault Duster uses 55W halogen bulbs.
Replacing low beam headlights with a Renault Duster does not require special skills and fancy tools.
Which company to trust
When buying spare parts, you should trust only reliable companies:
Saving on spare parts and buying a cheap Chinese replacement can lead to lamp failure, blinding oncoming drivers and melting of the optics. Replacing low beam headlights on a Renault Duster may be useless if you buy Chinese parts.
To get the job done, you'll need a new low beam kit and some free time. It is necessary to follow the instructions when replacing the low beam Renault Duster. Will need:
- Open the hood.
- Remove the low beam rubber cover from the rear of the headlamp.
- To remove the lamp, pull it towards the motor by the chip with wires.
- Disconnect the contacts and connect them to the new lamp.
- Install the new part in its original location on the headlight assembly.
- Replace the protective cover.
Replacing the right low beam headlight with a Renault Duster is faster due to the lack of a battery. The left lamp will require additional battery removal. For this you need:
- Unscrew the terminals with a key to “10”.
- Unscrew the retaining bar.
- Remove the battery.
Important! When replacing lamps yourself, it is strictly forbidden to touch the flask filled with halogen gas with your fingers. This can lead to a quick failure of the new part.
The cost of a car service
Replacing the dipped beam with a Renault Duster at an authorized dealer can cost the car owner 4000-6000 conditional units. The cost of work starts from 1500-2000 conventional units, and the original lighting elements are estimated at about 1000-2000 conventional units. The official dealer may include the obligatory adjustment of the optics at the stand as additional work. This option will cost at least 1500 conditional units.
In a regular car service, 1000-1500 conditional units will be asked for the replacement of light bulbs. Lamps will need to be purchased in advance by yourself.
With auto-replacement, you only need to spend money on buying new lamps. Light elements are best replaced in pairs to ensure the best light output. The estimated life of new lamps from a branded manufacturer is 3 to 4 years or 60,000 to 80,000 km.



